EPU-M5 electric drive pressure regulator control unit
Продукция
<
EPU-M5 electric drive pressure regulator control unit

The EPU-M5 electric drive pressure regulator control unit is designed to control the gas pressure reducer.

The equipment is used as a part of the software and hardware complex of automatic gas pressure regulation at the gas distribution station.

The drive unit must be operated under conditions normalized for version UHL category 2 according to GOST 15 150-69, but for operation at ambient temperature from minus 40 to plus 50 °С.

You can order an EPU-M5 electric drive pressure regulator control unit for operation in Class 2 explosive areas according to DNAOP 0.00-1.32-01 “The Rules for Electrical Installations. Electrical equipment of special installations” (chapter 4), where the formation of explosive mixtures of IIA category of groups T1-T4 according to GOST 12.1.011-78 is possible.

The electric drive is produced in explosion-proof design by Kontact LLC in cooperation with INEC LLC, Ukrainian-Russian Joint Venture.  The explosion protection marking is 2ExeicIIAT4X.

Technical Specifications EPU-M5
Name of the main parameters Technical Specifications
Power supply voltage, V+12В, +24В
Power consumption, W32
Number of output shaft rotations in the range of control signal change, max9
Travel range of the screwed spindle unit stop, not more than, mm13,5
Axial thrust, developed by the screwed spindle unit stop, not less than, kg500
Degree of protection from external influences according to GOST 14254-96IP54
Overall dimensions, mm226Х218Х218
Weight, not more, kg18
Probability of no-failure operation within 10,000 hours0.98
Service life, not less, years10